Tools 2, Almost Ready to PC

One more list of tools and then we'll be ready to Powder Coat (PC). Metal preparation is the most important step to having success with powder coating so our list includes simple things you probably have around the house.

• Scouring pad or sand paper
• Acetone, paint thinner or alcohol 
• Wax paper
• Needle-nose pliers

We tend to use copper since it is available at the local recycler for around $3.00 a pound, but PC can be done on any metal or anything that can take the 400 degree curing.

All metals come with some oxidation, greases and oils so the first step is to clean the surface with some sanding. We like a scouring pad since it's flexible and can also get into the textured metals.

Then a quick rub down with a solvent. Be sure to use a lint free cloth and hold the pieces by the edges as to not get any finger prints on it.

Now place the cleaned piece on the wax paper for easy clean up and we're ready to Powder Coat.

The pliers will be used to move the coated pieces in and out of the oven.

Keep your oven door closed, A&J